We only sell replacement tops to prior VG owners. Tops are $25 with free shipping.
If you think you need a replacement top due to a loss of performance it may be that you need only to remove soot deposits from the filter.

Before contacting us carefully read the following excerpt from the User Guide:

DO NOT touch the flame to the ceramic filter. Contacting the flame to the ceramic filter will not damage the filter, but it will form bad-tasting smoke and soot. Soot will also be deposited on the ceramic filter, and can eventually clog the filter. Soot deposits appear as pitch-black areas on the filter, which is gray.

Soot deposits on the ceramic filter can be removed with two methods:

1) A very good method for removing soot is to use boiling hot water. Simply pour the hot water onto the ceramic filter. Tap or shake the filter unit until the water passes through the ceramic filter. Continue pouring water through the ceramic filter until no soot remains. This method takes about 10 minutes and should leave the ceramic filter perfectly clean.

2) A second method is to burn off the soot using a blue flame windproof lighter. To burn off soot, suck air through the filter (for example by inhaling from the VG, or by placing the filter on a vacuum cleaner intake), and direct the blue flame towards to soot deposits. The blue flame produces very high temperatures that burn off the soot. The ceramic filter may be heated until it glows a dark red color. This process should take about 30-60 seconds.

If you still think you need a replacement top, fill out the form below and we will contact you with further instructions for ordering replacement tops.

(*) = Required

Your Email Address (*)

Invalid email.
Name (*)

You must enter your name.
Where did you purchase your VaporGenie? (*)

You must tell us where you purchased your VaporGenie.
Have you set your spam filter to accept all email from VaporGenie.com (*)
Yes
You must set your spam filter to accept all email from VaporGenie.com